64oz mini keg, coffee spear with black holder, SS nitro tap
Relief valve safety pressure:
for nitro cold brew coffee
Bar, party, home, picnic and berwery, cafe store
304 food-grade stainless steel,sealing rubber
coffee beverage dispenser
10000 Piece/Pieces per Month
Packaging & Delivery
6sets into one carton.
1 - 1000
To be negotiated
* Easy to install, use and clean. * Give home cold-brewers the royal treatment * Take & share it everywhere (home & outdoor activities) * Make nitro cold brew coffee easily at home & DIY the best nitro coffee you've ever had. * The nitrogen effect cuts the acidity that is tied to traditional cold brew, making it easier on the stomach. * Cold brewed coffee is less bitter & sour, sweeter & oilier, richer flavor, cold storage for 2-4 weeks.
Parts Of The Product
Either 2L/4L/5L/10L mini keg can match the same nitro coffee tapping system
1 X 2L mini keg 1 X coffee spear with black holder
1 X stainless steel nitro tap
(not include the 8g N2/N2O cartridge, because the N2/N2O cartridge is forbidden to shipping by air,do not exceed 15 PSI)
We can provide full size keg(2L/4L/5L/10L) to match the coffee tapping system
We can provide various nitro tap to match the coffee tapping system
Our coffee spear with safety valve
If you want to know more information. please click on " send". You can also check our website.
We are specialized in draft beer packing and tapping solutions since 2013,.like stainless steel mini keg, beer bottle/ growler, CO2 dispenser, beer tapping system and home brewing accessories. We are cooperating with ISO certified manufacturing facilities in China. Our products have passed testing by SGS and Bureau Veritas as per FDA, KFDA, LFGB and EU standards.
If you want to have a further discussion with us. please click on " send " You can also check our website.
Leaks gas as soon as the cartridge is installed
1.Make sure the regulator dial is off turned all the way counter close
2.Tighten the cartridge seal Replace the CO2 cartridge it is damaged
The tap is open, but no beer comes out
Make sure the CO2 cartridge is installed, the cap is turned on, and pressure is indicated on the pressure gauge.
Tap continues to drip ,
without stopping when closed
1.A few drips after closing the tap is normal. But it should not drip over time. 2. If the keg and tapping system is clean, internal O-ring may have worn through use and be in need of replacement.
Beer pours foamy every time (more than1/4 cup of foam)
1.First pour may be foamy if the beer line is full of air after being filled or the tap assembly has been allowed to warm up. Second beer should pour fine, if that's the case. Keep out of the sun.
2.Beer may be highly carbonated from the bar or brewery. If beer in keg is pressurized at 5 psi but came from brewery beer line pressurized at 25 psi, beer will pour foamy until the pressure equalizes after few days in the keg.
Be sure to open the tap handle fully and let go during the pour. Attempting to meter the flow during the pour can lead to foaming.
1. If you have any problems about your beer, you can leave message to us. we would like to use our experience to help you.
2. We will appreciate if you can send us some advice.